Jump to content



Photo

1 Litre Yaris ECU Wiring Diagram


  • Please log in to reply
9 replies to this topic

#1 Aidan

Aidan

    Ban Hammerer

  • Administrators
  • 12,676 posts
  • Location:York
  • Car Model:T Sport

Posted 26 December 2009 - 03:31 PM

Bought a Bee-R Rev Limiter Yesterday, and need the ECU Wiring Diagram. Any ideas where i can get this?

#2 coupi

coupi

    YCUK Post King

  • Paid Member
  • 5,563 posts
  • Location:Midlands
  • Car Model:Not a Yaris!

Posted 26 December 2009 - 04:11 PM

You sure they fit on the Yaris/Vitz?

Ive searched and cant find anything for the 1.0, 1.3, 1.5 or 1.5 Turbins. The Bee-R websites Toyota wiring diagram list doesnt have them on, nor does google come up with anything.

123_zps4d990961.png


#3 Aidan

Aidan

    Ban Hammerer

  • Administrators
  • 12,676 posts
  • Location:York
  • Car Model:T Sport

Posted 26 December 2009 - 10:42 PM

Its a rev limiter... Its not going to have everything on is it, its for cars that are used for drifting, etc.... The crappy little Vitz isnt the top on everyones agenda is it.

it fits on anything.. The guy i bought it off had it on a classic mini.


Its only got a Live and Neutral, and then one which goes to the ignition wire, and one that goes to Revs. You seriously think the Yaris doesnt have those?

Might as well try, nobody else on this forum bothers to do anything different except Coxy... and hes gone.


EDIT: If anyone wants the 1NZ-FE (T-Sport) ECU Wiring Pinout, heres a link:
http://www.powerente...arisControl.pdf

#4 TheCaptain69

TheCaptain69

    Ass Kicker

  • YCUK Legend
  • 4,322 posts
  • Location:Hambrook
  • Car Model:Not a Yaris!

Posted 26 December 2009 - 11:00 PM

^Dude ouch im trying to push the boat out ;) and that isnt the 1.5 pinout already looked that up its for the Xa or something like that :unsure:

"Be not afraid of greatness.
Some are born great, some achieve greatness,
and some have greatness thrust upon 'em."

Name: Mike

Suzuki Swift 1.3 GLS
Toyota Supra 4.0ltr V8 Manual

Carrying out any and all Yaris repairs in the South/South West :)


#5 Aidan

Aidan

    Ban Hammerer

  • Administrators
  • 12,676 posts
  • Location:York
  • Car Model:T Sport

Posted 26 December 2009 - 11:04 PM

Wiki says its a 1.5 liter engine thats used in the Yaris/Echo

#6 TheCaptain69

TheCaptain69

    Ass Kicker

  • YCUK Legend
  • 4,322 posts
  • Location:Hambrook
  • Car Model:Not a Yaris!

Posted 26 December 2009 - 11:10 PM

Yeah iknow i looked it up thinking it was that but i got a spare ECU and Loom sat next to me completly different but i do have the link for the right one if any1 should need it...but i cant help you with the 1.0ltr haven't seen anything on it :huh:

"Be not afraid of greatness.
Some are born great, some achieve greatness,
and some have greatness thrust upon 'em."

Name: Mike

Suzuki Swift 1.3 GLS
Toyota Supra 4.0ltr V8 Manual

Carrying out any and all Yaris repairs in the South/South West :)


#7 Aidan

Aidan

    Ban Hammerer

  • Administrators
  • 12,676 posts
  • Location:York
  • Car Model:T Sport

Posted 27 December 2009 - 12:49 AM

Well send us the TSport one please mate, it might have similar pins?

#8 coupi

coupi

    YCUK Post King

  • Paid Member
  • 5,563 posts
  • Location:Midlands
  • Car Model:Not a Yaris!

Posted 27 December 2009 - 09:41 AM

Oh, I didnt know how they wired in, I thought it'd be a plug, not just two wires, sorry ;)

123_zps4d990961.png


#9 Coxy

Coxy

    YCUK Keyboard Masher x6000

  • YCUK Legend
  • 6,074 posts
  • Location:York
  • Car Model:T Sport

Posted 27 December 2009 - 03:25 PM

I've got the 1NZ pinout from earpl so it's deffo right, unlike that one.

Oh and it will be zero help for the 1SZ ecu lol.

I never really got to the point of fitting one of these. I was very close but gave up. Biggest issue I found was that there isn't 1 wire for either the RPM or ignition (can't remember which) like on most cars that have these. The Yaris has 4 so I imagine you need to make 4 extra wires.

I dunno, but I'm sure we'll manage.

#10 Aidan

Aidan

    Ban Hammerer

  • Administrators
  • 12,676 posts
  • Location:York
  • Car Model:T Sport

Posted 27 December 2009 - 04:21 PM

I've got the 1NZ pinout from earpl so it's deffo right, unlike that one.

Oh and it will be zero help for the 1SZ ecu lol.

I never really got to the point of fitting one of these. I was very close but gave up. Biggest issue I found was that there isn't 1 wire for either the RPM or ignition (can't remember which) like on most cars that have these. The Yaris has 4 so I imagine you need to make 4 extra wires.

I dunno, but I'm sure we'll manage.


It could be all 4... or only one. We'll have to have a go eh Coxy :)




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

Skin Designed By Evanescence at IBSkin.com