OMP Rear Strut Installation

Probably one of the easiest mods to do.

What you will need:

14mm socket and wrench, 14mm spanner and the OMP upper rear strut brace.



First, open the rear hatch, squeeze and lift the rear strut top covers.



Then, twist and lift off the caps to reveal the nuts.



Hold the bottom nut with the spanner and undo and remove the top nut with the 14mm socket.



Then your digital camera will stop working......find a replacement :lol: 

Fit the brace on top of the remaining nut either side, making sure it is level.



Replace the nuts inside the brace, then then tighten with the socket.



Keep the strut caps and covers somewhere safe.

Stand back, light your pipe, and admire your handywork :D