Well this is a quick run thru of what i did but
Removed Dial surround by pulling up gently and towards myself.
Then you will have this to look at
Next remove two screws either side of the speedo
Only removed the 2 higher screws as thats all thats holding it in.
Then the dials were free from the dash all you now need to do is pull out the 3 connectors which are plugged into the dials at the bottom on the front. Carefully!!!
Now inside my warm house i had this
The 3 bulbs you can see in the middle in a line are the ones you need to fiddle with.
Take the bulbs out and 2 of the bulbs have little blue covers on them. Remove them.
I then painted the bulbs red as thats the colour i wanted them.
Speedo Removal
