Jump to content
Sign in to follow this  
Reggie-rock

Door Replacement (3 Door Model)

Recommended Posts

My drivers door is a bit rotten at the bottom. Instead of trying to repair it think it would be easier to get another used door in the same dark blue colour and replace it myself.

Has anyone done this as I thought it can't be that hard ?

Share this post


Link to post
Share on other sites

I am currently getting a replacement door for mine for a similar reason. All Yaris doors should fit. To make it easier thou I would recommend finding a door the same colour/model with all the internal parts that way you don't have to swap everything over. You just need to attach the hinges and swap the lock over.

Share this post


Link to post
Share on other sites

According to Haynes:

 

Door removal:

 

1. Open the door and disconnect the wiring plug at the front edge.

2. Unbolt the door check strap from the door, or from the door pillar.

3. Ensure that the door is adequately supported, with the aid of an assistant, or using a wooden block or similar under the bottom edge of the door (take care not to damage the paintwork).

4. Mark the position of the hinges on the body or on the door, then unscrew the bolts and remove the door from the car.

 

Refitting the door is a reversal of removal.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×